BMS Kia Stinger / Genesis G70 3.3L V6 Performance Dual Intake
Bolt on More Horsepower, Torque, and Better Sound
Featuring high-quality BMS dual inverted cone filters, the BMS KIA Stinger intake offers maximum airflow in an attractive and easy-to-install package. The BMS intake for the KIA Stinger removes factory restrictions while retaining the factory cold air ducting, heat-isolating airbox bottom, and high-flow turbo inlet fittings. A stylish top-half shroud protects the intake from radiant engine heat, leading to dramatically improved performance, throttle response, and amazing sound. More boost equals higher performance gains!
Our Burger Motorsports renewable inverted cone filters not only outflow your stock paper filter but also last the vehicle's lifetime. They include a built-in velocity stack for smoother air intake, a feature used in most racing applications.
This intake has been extensively tested on the BMS development KIA Stinger, running 11.9@120mph in the 1/4 mile and 148mph half-mile traps.
Installation is quick and easy, taking only a few minutes. The high-flow BMS dual inverted cone filters can be cleaned and renewed every 15-20k miles for optimal performance.
Available in Three Finishes
- Matte Black
- Glossy Black
- Matte Red
Replacement inverted cone filters are available in Blue or Red and can be purchased here.
NEW! Optional BMS High Flow Silicone Turbo Inlets
SAVE $80.00 when purchased with intake (Limited Time)
Our new silicone high-flow turbo inlets replace factory accordion inlets with better-flowing silicone inlets. Expect improved boost response, more turbo sound, and a cleaner engine bay! Power gains of up to 10whp have been observed with aggressive tuning.
Features and Benefits
- Adds horsepower and torque
- Improved throttle response
- Enhanced engine sound
- Includes black heat shields
- Dual inverted cone filters for maximum airflow
- Cleanable, renewable inverted cone filters
- Easy installation and removal
Vehicle Fitment
- 2018-2023 KIA Stinger GT, GT1, GT2 3.3L V6
- 2018+ Genesis G70 3.3L V6
- Does not fit 2.0L 4-cylinder models.
What's Included
- (2) 3.5" Powder-coated aluminum intake pipes
- (2) Renewable inverted cone filters w/clamps
- (2) Aluminum heat shields
- (2) M6x1.0x16mm bolts
- (2) M6 nuts
- (4) M6 washers
Dyno Results
Gallery
Sound Clip Video
Install Video
Original: $379.00
-70%$379.00
$113.70More Images
BMS Kia Stinger / Genesis G70 3.3L V6 Performance Dual Intake
Bolt on More Horsepower, Torque, and Better Sound
Featuring high-quality BMS dual inverted cone filters, the BMS KIA Stinger intake offers maximum airflow in an attractive and easy-to-install package. The BMS intake for the KIA Stinger removes factory restrictions while retaining the factory cold air ducting, heat-isolating airbox bottom, and high-flow turbo inlet fittings. A stylish top-half shroud protects the intake from radiant engine heat, leading to dramatically improved performance, throttle response, and amazing sound. More boost equals higher performance gains!
Our Burger Motorsports renewable inverted cone filters not only outflow your stock paper filter but also last the vehicle's lifetime. They include a built-in velocity stack for smoother air intake, a feature used in most racing applications.
This intake has been extensively tested on the BMS development KIA Stinger, running 11.9@120mph in the 1/4 mile and 148mph half-mile traps.
Installation is quick and easy, taking only a few minutes. The high-flow BMS dual inverted cone filters can be cleaned and renewed every 15-20k miles for optimal performance.
Available in Three Finishes
- Matte Black
- Glossy Black
- Matte Red
Replacement inverted cone filters are available in Blue or Red and can be purchased here.
NEW! Optional BMS High Flow Silicone Turbo Inlets
SAVE $80.00 when purchased with intake (Limited Time)
Our new silicone high-flow turbo inlets replace factory accordion inlets with better-flowing silicone inlets. Expect improved boost response, more turbo sound, and a cleaner engine bay! Power gains of up to 10whp have been observed with aggressive tuning.
Features and Benefits
- Adds horsepower and torque
- Improved throttle response
- Enhanced engine sound
- Includes black heat shields
- Dual inverted cone filters for maximum airflow
- Cleanable, renewable inverted cone filters
- Easy installation and removal
Vehicle Fitment
- 2018-2023 KIA Stinger GT, GT1, GT2 3.3L V6
- 2018+ Genesis G70 3.3L V6
- Does not fit 2.0L 4-cylinder models.
What's Included
- (2) 3.5" Powder-coated aluminum intake pipes
- (2) Renewable inverted cone filters w/clamps
- (2) Aluminum heat shields
- (2) M6x1.0x16mm bolts
- (2) M6 nuts
- (4) M6 washers
Dyno Results
Gallery
Sound Clip Video
Install Video
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bolt on More Horsepower, Torque, and Better Sound
Featuring high-quality BMS dual inverted cone filters, the BMS KIA Stinger intake offers maximum airflow in an attractive and easy-to-install package. The BMS intake for the KIA Stinger removes factory restrictions while retaining the factory cold air ducting, heat-isolating airbox bottom, and high-flow turbo inlet fittings. A stylish top-half shroud protects the intake from radiant engine heat, leading to dramatically improved performance, throttle response, and amazing sound. More boost equals higher performance gains!
Our Burger Motorsports renewable inverted cone filters not only outflow your stock paper filter but also last the vehicle's lifetime. They include a built-in velocity stack for smoother air intake, a feature used in most racing applications.
This intake has been extensively tested on the BMS development KIA Stinger, running 11.9@120mph in the 1/4 mile and 148mph half-mile traps.
Installation is quick and easy, taking only a few minutes. The high-flow BMS dual inverted cone filters can be cleaned and renewed every 15-20k miles for optimal performance.
Available in Three Finishes
- Matte Black
- Glossy Black
- Matte Red
Replacement inverted cone filters are available in Blue or Red and can be purchased here.
NEW! Optional BMS High Flow Silicone Turbo Inlets
SAVE $80.00 when purchased with intake (Limited Time)
Our new silicone high-flow turbo inlets replace factory accordion inlets with better-flowing silicone inlets. Expect improved boost response, more turbo sound, and a cleaner engine bay! Power gains of up to 10whp have been observed with aggressive tuning.
Features and Benefits
- Adds horsepower and torque
- Improved throttle response
- Enhanced engine sound
- Includes black heat shields
- Dual inverted cone filters for maximum airflow
- Cleanable, renewable inverted cone filters
- Easy installation and removal
Vehicle Fitment
- 2018-2023 KIA Stinger GT, GT1, GT2 3.3L V6
- 2018+ Genesis G70 3.3L V6
- Does not fit 2.0L 4-cylinder models.
What's Included
- (2) 3.5" Powder-coated aluminum intake pipes
- (2) Renewable inverted cone filters w/clamps
- (2) Aluminum heat shields
- (2) M6x1.0x16mm bolts
- (2) M6 nuts
- (4) M6 washers
Dyno Results
Gallery
Sound Clip Video
Install Video
